Brother PT-2410 - Manual (Page 102)

98
To change the barcode parameter settings:
3 Press .
☞
To return to the barcode data without changing any parameter settings, press .
4 Press or until the parameter that you wish to change appears.
5 Press or until the desired setting is displayed.
6 Repeat steps 4 and 5 until all parameters are set as you wish.
7 Press .
To add a special character to the barcode data:
8 Press or until the cursor is below the character immediately to the right of
where you wish to add the special character.
9 Hold down and press .
0 Press or until the desired special character is displayed.
☞
The following special characters can only be entered when using protocol CODE
39.
The following special characters can only be entered when using protocol EAN
128.
SYMBOL
SPECIAL
CHARACTER
1 +
2 $
VALUE
SPECIAL
CHARACTER
VALUE
SPECIAL
CHARACTER
VALUE
SPECIAL
CHARACTER
3 # 69 ENQ 87 ETB
4 $ 70 ACK 88 CAN
11 + 71 BEL 89 EM
28 < 72 BS 90 SUB
29 = 73 HT 91 ESC
30 > 74 LF 91 {
32 @ 75 VT 92 FS
Home
Clear
Del
Clear
Del
Home
End
New Block
Code Code Alt
Symbol
Alt
Symbol
Home
End