Brother PT-2410 - Manual (Page 105)

101
AUTO CUT FUNCTION
The Auto cut function allows you to set whether or not the machine will automatically cut off
each label after it is printed. Turn on the Auto cut function before starting to print in order to
cut off the labels automatically after printing them.
☞
After printing a label with the Auto cut function set to OFF, hold down and press
once to feed the tape and cut it.
When a tape margin setting other than FULL is selected, extra tape is fed out before
printing starts. The extra tape is cut off if the Auto cut function is set to ON so that the
margins on each side of the text are equal.
To turn on or off the Auto cut function:
1 While holding down , press once, and keep held down to display the
current auto cut setting.
2 While still holding down , continue pressing until the desired auto cut setting
is displayed.
3 Release to apply the selected auto cut setting.
EXAMPLE
To turn on the Auto cut function:
1 While holding down , press
once, and keep held down.
2 While still holding down , con-
tinue pressing until ON is dis-
played.
3 Release .
Code Code
Space
Feed&Cut
Space
Code Code Z
A.Cut
Z Code Code
Code Code Z
A.Cut
Z
Code Code
O F F
A U T O C U T Alt
Caps
Width
Length
A.Format
Undl/Frm
Length
Code Code Z
A.Cut
Z
Code Code
O N
A U T O C U T Alt
Caps
Width
Length
A.Format
Undl/Frm
Length
Code Code
Z
A.Cut
Z
Code Code