Brother MFC-J6920DW - Manual (Page 119)

Routine maintenance
105
A
Setting the date and
time
A
The Touchscreen displays the date and time.
If it is not current, re-enter it here.
You can add the date and time to each fax
you send by setting your Station ID.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Press Date & Time.
f
Press Date.
g
Enter the last two digits of the year on
the Touchscreen, and then press OK.
h
Enter the two digits for the month on the
Touchscreen, and then press OK.
i
Enter the two digits for the day on the
Touchscreen, and then press OK.
j
Press Clock Type.
k
Press 12h Clock or 24h Clock.
l
Press Time.
m
To enter the time, do one of the
following:
 If you chose 12h Clock in step k,
enter the time (in 12-hour format)
using the keyboard on the
Touchscreen, and then press
AM or PM.
Press OK.
 If you chose 24h Clock in step k,
enter the time (in 24-hour format)
using the keyboard on the
Touchscreen.
Press OK.
(For example, enter 19:45 for
7:45 PM.)
n
Press .