Brother MFC-J6920DW - Manual (Page 118)

104
NOTE
When a print head nozzle is clogged, the
printed sample looks like this.
Letter, A4 and Executive
Ledger, A3, Legal, A5, A6, envelopes,
Photo (4
 6 in.)/(10  15 cm),
Photo L (3.5  5 in.)/(89  127 mm),
Photo 2L (5  7 in.)/(13  18 cm) and
Index Card (5  8 in.)/(127  203 mm)
After the print head nozzle is cleaned, the
horizontal lines are gone.
Checking the print alignment
A
You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become
faded.
a
Press .
NOTE
You can also press and Ink.
b
Press Test Print.
c
Press Alignment.
d
Press OK.
The machine starts printing the
Alignment Check Sheet.
e
For the “A” pattern, swipe up or down, or
press a or b to display the number of the
test print that has the least visible
vertical stripes (1-9), and then press it.
Press OK.
Repeat this step for the B, C and D
patterns.
In the example number 6 is the best
choice for A, B, C and D.
NOTE
f
Press .
i
When the print
alignment is not
adjusted properly,
text looks blurry
like this. After the print
alignment is
adjusted properly,
text looks like this.