Maintenance, Changing the light bulb, When replacing the light bulb – Brother PE-170D User Manual
Page 60
57
MAINTENANCE
MAINTENANCE
CHANGING THE LIGHT BULB
1
2
3
4
When replacing the light bulb
1. Turn the main power switch off.
1
ON
2
OFF
*
The power cord plug must be removed from the socket
outlet prior to changing the bulb.
2. Loosen the screw in the end cap at the left side of the
machine.
3. Remove the end cap.
4. Replace the snap-in light bulb with a new one of the same
type.
*
Light bulbs are available through your dealer. (8 V, 2.4 W/
Parts code X50228-001 or item #SA105.)