Selecting patterns from a memory card, Important – Brother PE-170D User Manual
Page 43
40
IMPORTANT
*
If the card is inserted in a direction other than that
indicated by the arrow on the card, the connector in the
card slot will become damaged.
*
Insert so that the card appears as shown in the
illustration at left. If you try to push the card in any
further, the connector will become damaged.
*
Be sure to turn the power switch off before removing
the card. Pull the card straight out from the slot.
*
Always keep the memory cards in their proper case
when they are not in use.
Selecting patterns from a memory card
Be sure to turn off the power switch before inserting or removing the memory cards.
1. Turn the power switch off.
2. Insert the memory card into the card slot according to the
direction of the arrow mark on the memory card.
1
Direction arrow on memory card
3. Turn the power switch on.
4. The pattern selection screen for the inserted memory card
will be displayed.
(The illustration shows the pattern selection screen for the
No. 2 Flower card.)
The selection process from this point is the same as for
selecting built-in patterns.
*
If you use a selection key to display another screen, you can
return to the above pattern selection screen by touching
“CARD”.
2
“CARD” key