Brother MFC-J410W - Manual (Page 41)

Scanning
35
2
c
Click File, then Scan or Get Photo. You can also click the Scan or Get Photo button.
The Scan or Get Photo panel appears on the left side of the screen.
d
Click the Select button.
e
Choose TWAIN: TW-Brother MFC-XXXX or TWAIN: TW-Brother MFC-XXXX LAN from the
Available Scanners list.
(Where XXXX is your model name.)
f
Check the Display scanner dialog box on the Scan or Get Photo panel.
g
Click Scan.
The Scanner Setup dialog box appears:
h
Adjust the following settings, if needed, in the Scanner Setup dialog box:
 Scan (Image Type) (1)
 Resolution (2)
 Scan Type (3)
 Reduce Noise (4)
 Brightness (5)
 Contrast (6)
 Document Size (7)
i Click Start.
When scanning is finished, click Cancel to return to the PaperPort™11SE window.
Note
After you select a document size, you can adjust the scanning area further by clicking the left mouse button
and dragging it. This is required when you want to crop an image when scanning.
7