Brother MFC-J410W - Manual (Page 117)

Firewall settings (For Network users)
111
7
d
Add port 54925 for network scanning by entering the information below:
1 In Description of service: Enter any description, for example “Brother Scanner”.
2 In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter “Localhost”.
3 In External Port number for this service: Enter “54925”.
4 In Internal Port number for this service: Enter “54925”.
5 Make sure UDP is selected.
6 Click OK.
e
Click the Add button.
f
Add port 54926 for Network PC-Fax by entering the information below:
1 In Description of service: Enter any description, for example “Brother PC-Fax”.
2 In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter “Localhost”.
3 In External Port number for this service: Enter “54926”.
4 In Internal Port number for this service: Enter “54926”.
5 Make sure UDP is selected.
6 Click OK.
g
If you still have trouble with your network connection, click the Add button.
h Add port 137 for both network scanning and Network PC-Fax receiving by entering the information
below:
1 In Description of service: Enter any description, for example “Brother Network Print”.
2 In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter “Localhost”.
3 In External Port number for this service: Enter “137”.
4 In Internal Port number for this service: Enter “137”.
5 Make sure UDP is selected.
6 Click OK.
i
Make sure that the new setting is added and is checked, and then click OK.
1
2
3
4
5