Brother MFC-J410W - Manual (Page 109)

Brother PC-FAX Software (MFC models only)
103
5
Enabling the PC-FAX Receiving software on your machine
5
You can optionally enable the Backup Print option. When enabled, the machine will print a copy of the fax
before the fax is sent to the PC or the PC is switched off.
a
Press Menu.
b Press a or b to choose Fax.
Press OK.
c
Press a or b to choose Setup Receive.
Press OK.
d
Press a or b to choose Memory Receive.
Press OK.
e
Press a or b to choose PC Fax Receive.
Press OK.
f
Confirm the message.
Press OK.
g Press a or b to choose or your PC name if connected on a network.
Press OK.
h Press a or b to choose Backup Print:On or Backup Print:Off.
Press OK.
i Press Stop/Exit.
Note
If you select Backup Print:On, the machine will print the fax, so you will have a copy if there is a power
failure before it is sent to the PC. The fax messages are automatically erased from your machine’s memory
when they have been successfully printed and sent to your PC. When you select Backup Print:Off
your fax messages are automatically erased from your machine’s memory when they have been
successfully sent to your PC.
Running the PC-FAX Receiving software on your PC
5
Click the Start button, All Programs, Brother, MFC-XXXX, PC-FAX Receiving and Receive.
The PC-Fax Receiving dialog box appears. Confirm the message and click OK.
The PC-FAX icon appears in your PC tasktray.