Brother FAX 1920CN - Manual (Page 82)

BROTHER INTERNET FAX PRINTING SOFTWARE 9 - 3
NC9100h_FM6.0
During the installation you are presented with the following screen,
select the default unless you have previously installed this software.
If this is the case use a port number that has not been previously
configured. Example BFP2
You also need to enter certain information into the printer driver
dialog screen as illustrated below.
It is very important that you enter your own E-mail address. You also
need to configure the SMTP mail server IP address or host name as
illustrated above.
If in any doubt contact your Network Administrator for
assistance
When Installing BFP on Windows ®
2000 and XP operating systems we
recommend that you add a “:” to the
end of the port name, so BFP1 =
BFP1:
This can be the host
name or IP address of
the E-mail server
Here you can enter the default E-mail
address or you can leave it blank.
* If an address is specified here this
will always be used as default
sending address.