Brother FAX 1920CN - Manual (Page 77)

8 - 5 TROUBLESHOOTING
NC9100h_FM6.0
Brother Internet Print (TCP/IP) Troubleshooting
1 The first step in troubleshooting is to make sure that you have a
valid E-mail connection on both the sending PC and the
receiving Print/Fax server. Try sending an E-mail message from
the PC to a user at the remote site who can receive mail via the
POP3 server. If this does not work, there may be an E-mail
configuration problem on the PC, on the local E-mail server, or
on the remote POP3 server. Double check to make sure that the
E-mail parameters that you configured on the PC and on the
remote Print/Fax server match those that are configured on the
E-mail servers.
2 If you can print small files OK but are having problems printing
large files, the problem may be in the E-mail system! Some
E-mail systems have difficulties printing large files. If the file
does not reach its destination intact, then the problem is with
the E-mail system.
3 You can also enable the partial E-mail print facility on your client
PC, this will split the E-mail up into fragments which should then
not overwhelm your E-mail server. To do this, select the
property dialog of the Brother Internet Print Port.