Brother FAX 1920CN - Manual (Page 67)

7 - 3 CONFIGURING INTERNET PRINTING FOR WINDOWS ®
NC9100h_FM6.0
Brother Internet Print
Configuring the Brother Print/Fax Server
The Print/Fax server can be configured using BRAdmin Professional
utility.
Print Server Configuration Checklist
1 Configure the POP3 server on the E-mail server at the remote
site with a mail account (Mailbox name) and password for the
Brother Print/Fax server (generally, the mail account name will
be the first part of the Email address; for example, if you assign
the E-mail address [email protected], then the mail
account name would be emailprinter).
2 Make sure that the Print/Fax server is installed and running with
TCP/IP enabled and has a valid IP address assigned to it.
Because access to the E-mail server on most networks is usually
restricted, you may need to have your network administrator check
the configuration and add the mail account.
Before configuring the print server to receive BIP jobs, be
sure that the E-mail server at the remote site (the receiving
end) is configured to handle the TCP/IP POP3, and SMTP
protocols (SMTP is only required if the notification feature is
enabled).