Brother MFC-5895CW - Manual (Page 81)

Wireless Configuration for Macintosh using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
71
5
Configuration using the SES/WPS/AOSS control panel menu
(One-Push method)
5
Before configuring the wireless settings
5
IMPORTANT
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Use Menu, a or b to choose Network, press
OK. Press a or b to choose Factory Reset, press OK. Choose Yes to accept the change. For
Touchscreen models, press MENU, Network, a or b to display Factory Reset then press
Factory Reset, and choose Yes to accept the change. The machine will restart automatically.
• SecureEasySetup™ is not available for MFC-5895CW.
Configure the wireless settings
5
a Turn on the machine by plugging in the power cord.
b Press Menu.
Press a or b to choose Network, press OK.
Press a or b to choose Network I/F, press OK.
Choose WLAN.
(For Touchscreen models)
5
Press MENU. Press Network. Press Network I/F and then press WLAN.
c Turn on your Macintosh.
d Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.