Brother MFC-5895CW - Manual (Page 151)

Network printing from Windows ® basic TCP/IP Peer-to-Peer printing
141
8
Configuring the standard TCP/IP port
8
Printer driver not yet installed
8
a
Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.
b
The CD-ROM main menu will appear. Click Initial Installation or Advanced.
c Click Printer Driver Only (for network).
d Click Next in response to the Welcome message. Follow the on-screen instructions.
e Choose Standard Installation and click Next.
f Choose Brother Peer-to-Peer Network Printer, and then click Next.
g Follow the on-screen instructions, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer on the network.
h Continue through the Wizard clicking Finish when complete.
Printer driver already installed
8
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a (Windows
®
7)
Click the button, Control Panel, Hardware and Sound, and then Device and Printers.
(Windows Vista
®
)
Click the button, Control Panel, Hardware and Sound, and then Printers.
(Windows Server
®
2008)
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
(Windows
®
XP and Windows Server
®
2003)
Click the Start button and choose Printers and Faxes.
(Windows
®
2000)
Click the Start button and choose Settings and then Printers.
b
(Windows
®
7)
Choose the printer driver you wish to configure, and then click Print server properties from the menu.
(Other Windows
®
Operating Systems)
Right click on the printer driver you wish to configure, and then choose Properties.
c Click the Ports tab and click Add Port.