Brother MFC-5895CW User Manual

Page 61

Wireless configuration for Windows

using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)

Click Next.

LCD messages when using the SES/WPS/AOSS control panel menu

LCD shows

Connection status

Action

Setting WLAN

Searching or accessing the access point,
and downloading settings from the access
point.

—

Connecting SES

Connecting WPS

Connecting AOSS

Connecting to the access point.

—

Connected

Connection succeeded.

—

Connection Failed

Connection failed.
(If this is shown after the LCD shows
Connecting SES, Connecting WPS or
Connecting AOSS.)

1 Try starting j again.

2 If the same message continues,

reset the machine back to the factory
settings and try again.

A session overlap was detected.

Check that only one router or access
point has the Wi-Fi Protected Setup™
mode or AOSS™ mode enabled and try
starting from j again.

Incorrect Mode

A session overlap was detected.