Brother MFC-5895CW - Manual (Page 31)

Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
21
3
Step by step chart for wireless network configuration
3
For Infrastructure mode
3
a
Confirm your network environment. (See page 23.)
b
Confirm your wireless network setup method. (See page 24.)
c
Configure your machine for a wireless network. (See page 27.)
Wireless configuration and installing drivers and software have been completed.
 Infrastructure mode
Connected to a computer with an access point
or
 Ad-hoc mode See page 22.
Connected to a wireless capable computer
without an access point
Using the Setup
Wizard from the
control panel
(Recommended)
Using the
SES/WPS/AOSS
control panel
menu
Using the PIN
Method of Wi-Fi
Protected
Setup™
Using the Brother
installer
application
Temporarily using
a network cable
Using the
SES/WPS/AOSS
control panel
menu
See page 27. See page 31. See page 35.
For Windows
®
(See page 39.)
For Macintosh
(See page 63.)
For Windows
®
(See page 47.)
For Macintosh
(See page 71.)
Installing drivers and software (See the Quick Setup Guide.)