Brother MFC-5895CW - Manual (Page 107)

Control panel setup
97
6
IPv6 (For MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, DCP-6690CW and
MFC-6890CDW)
6
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit
http://solutions.brother.com.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c (For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e Press a or b to choose IPv6.
Press OK.
f Press d or c to choose On or Off.
Press OK.
g Press Stop/Exit.
For MFC-5490CN
6
a Press Menu, 5, 1, 0.
b Press a or b to choose On or Off.
Press OK.
c
Press Stop/Exit.
For Touchscreen models
6
a
Press MENU.
b
Press Network.
c
(For Wired) Press Wired LAN.
(For Wireless) Press WLAN.
d
Press TCP/IP.
e
Press a or b to display IPv6 and then press IPv6.
f
Press On or Off.
g
Press Stop/Exit.