Brother MFC-J6720DW - Manual (Page 8)

8
g
Gently put the paper into the paper tray (for
MFC-J6720DW, tray #1, the upper tray).
h
Gently adjust the paper side guides to fit the
paper with both hands. Make sure that the
paper side guides touch the sides of the paper.
i
Check that the paper is flat in the tray and
below the maximum paper mark a.
j
Slowly push the paper tray completely into the
machine.
IMPORTANT
Make sure the paper is flat in the tray. If the paper
is pushed against the back of the tray, it may
cause paper feed problems.
NOTE
• When you use Ledger, Legal, Folio or A3 size
paper, press the universal guide release
button a as you slide out the front of paper
tray #1.
• When you load a different paper size in a tray,
you will need to change the paper size setting
in the machine at the same time. (See Paper
Size and Type in chapter 2 of the Basic User’s
Guide.)
1
1