Brother MFC 8480DN - Manual (Page 49)

Configuring your machine for a wireless network (For MFC-8690DW and MFC-8890DW)
38
3
LCD messages when using the SES/WPS/AOSS™ control panel menu
3
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.
LCD shows Connection status Action
Setting WLAN
Searching or accessing the access
point, and downloading settings from the
access point
—
Connecting SES
Connecting WPS
Connecting AOSS
Connecting the access point —
Connected
Connection succeeded. —
Connection Error
Session overlap has been detected.
Check that only one router or access point has
the SecureEasySetup™ mode, the Wi-Fi
Protected Setup mode or AOSS™ mode enabled
and try starting from step c again.
No Access Point
The access point detection failed.
Move the machine closer to your access
point/router and try starting from step c again.
Connection Fail
Connection failed.
1 Try starting from step c again.
2 If the same message continues, reset the
machine back to the factory settings and try
again.