Brother MFC-9330CDW - Manual (Page 31)

Sending a fax
23
3
Checking and canceling
waiting jobs
3
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
Touchscreen will show
No Jobs Waiting .
You can cancel a fax job that is stored and
waiting in the memory.
a
Press .
b
Press All Settings .
c
Swipe up or down, or press a or b to
display
Fax .
d
Press Fax .
e
Swipe up or down, or press a or b to
display
Remaining Jobs .
f
Press Remaining Jobs .
Jobs that are waiting will appear on the
Touchscreen.
g
Swipe up or down, or press a or b to
scroll through the waiting jobs and press
the job you want to cancel.
h
Press Cancel .
i
Do one of the following:

To cancel, press Yes . If you want to
cancel another job repeat step g.
 To exit without canceling, press No .
j
When you have finished canceling jobs,
press .
Setting your changes as the
new default
3
You can save the fax settings for
Fax Resolution , Contrast ,
Glass Scan Size , Real Time TX and
Coverpage Setup you use most often by
setting them as the default. These settings
will stay until you change them again.
a
Do one of the following:

When Fax Preview is set to Off ,
press ( Fax ).
 When Fax Preview is set to On , press
( Fax ) and
Sending Fax(es) .
b
Press Options .
c
Swipe up or down, or press a or b to
choose the setting you want to change,
and then press the new option.
Repeat this step for each setting you
want to change.
d
After changing the last setting, swipe up
or down, or press a or b to display
Set
New Default .
e
Press Set New Default .
f
The Touchscreen asks you to confirm
the change to the new default settings.
Press
Yes to confirm.
g
Press .