Brother MFC-9330CDW - Manual (Page 14)

Chapter 1
6
Dial Prefix
1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside
number, use this setting to automatically dial
9 for every fax you send.
Setting up the prefix number
1
a
Press .
b
Press All Settings .
c
Swipe up or down, or press a or b to
display
Initial Setup .
d
Press Initial Setup .
e
Swipe up or down, or press a or b to
display
Dial Prefix .
f
Press Dial Prefix .
g
Press On (or Off ).
h
Press Dial Prefix .
i
Enter the prefix number (up to 5 digits)
using the keyboard on the Touchscreen.
Press
OK .
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
j
Press .
Changing the prefix number
1
a
Press .
b
Press All Settings .
c
Swipe up or down, or press a or b to
display
Initial Setup .
d
Press Initial Setup .
e
Swipe up or down, or press a or b to
display
Dial Prefix .
f
Press Dial Prefix .
g
Press On (or Off ).
You can turn off the prefix number by
pressing
Off . The prefix number will
remain off until you press On .
h
Press Dial Prefix .
i
Do one of the following using the
keyboard on the Touchscreen.

To change the prefix number, press
d
or c to position the cursor under the
digit to be deleted and press the
Back Space button . Then press
the correct digit.
Repeat until the prefix number is
correct, and then press
OK .

To exit without making a change,
press
OK .
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
j
Press .