Brother MFC-8820DN - Manual (Page 89)

5 - 4 SETUP RECEIVE
Easy Receive
When you use this feature, you don’t have to press Start or the Fax
Receive Code 51 when you answer a fax call. Selecting On allows
the MFC to receive fax calls automatically, even if you lift the handset
of an extension or external phone. When you see Receiving on the
LCD or when you hear ‘chirps’ through the handset of an extension
phone connected to another wall jack/phone socket, just replace the
handset and your MFC will do the rest. Selecting Off means you’ll
have to activate the MFC yourself by lifting the handset of an external
or extension phone, and then press
Start on the MFC
—OR—by pressing 51 if you are not at your MFC. (See Operation
from extension telephones on page 5-7.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu , 2 , 1 , 3 .
3
Use or to select On (or
Off ).
Press Set .
4
Press Stop/Exit .
If this feature is set to On, but your MFC doesn’t connect a fax
call when you lift a extension or external phone handset, press
the Fax Receive Code
51 .
If you send faxes from a computer on the same phone line and
the MFC intercepts them, set Easy Receive to Off.
21.Setup Receive
3.Easy Receive
▲ On
▼ Off
Select ▲▼ & Set