Brother MFC-8820DN - Manual (Page 140)

9 - 2 PRINTING REPORTS
Setting the Fax Activity Report Interval
You can set the MFC to print activity reports at specific intervals (every
50 faxes, 6, 12 or 24 hours, 2 or 7 days). If you set the interval to Off,
you can print the report by following the Steps on the next page.
The default setting is Every 50 Faxes.
1
Press Menu , 2 , 4 , 2 .
2
Press or to choose an
interval. Press Set .
(If you choose 7 days, the LCD will
ask you to choose a day on which
to begin the 7-day countdown.)
3
Enter the time to begin printing in 24-hour format.
Press
Set .
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit .
If you select 6, 12, 24 hours, 2 or 7 days, the MFC will print the
report at the selected time and then erase all jobs from its
memory. If the MFC’s memory becomes full with 200 jobs
before the time you selected has passed, the MFC will print the
Activity Report early and then erase all jobs from memory. If you
want an extra report before it is due to print, you can print it
without erasing the jobs from memory.
If you select Every 50 Faxes, the MFC will print the Activity
Report when the MFC has stored 50 jobs.
24.Setup Reports
2.Act.Interval
▲ Every 50 Faxes
▼ Every 6 hours
Select ▲▼ & Set