Brother QL-570VM - Manual (Page 15)

15
Introduction
1
To use the machine safely
WARNING
Follow these guidelines to avoid fire, electric shock, or other damage.
The Machine
Unplug the power cord immediately and stop using the machine during an electrical storm.
There may be a remote risk of electric shock from lightning.
Do not touch any metal parts near the print head. The print head becomes very hot during
use and remains very hot immediately after use. Do not touch it directly with your hands.
Dispose of plastic bags correctly and keep away from babies and children. Do not wear or
play with plastic bags.
Unplug the power cord immediately and stop using the machine if you notice any abnormal
odor, heat, discoloration, deformation or anything unusual whilst the machine is in use or
storage.
Do not disassemble the machine. For inspection, adjustment and repair of the machine
contact the retail outlet where the machine was purchased or your local authorized service
center.
Do not drop, hit or otherwise bang the machine.
Do not hold and lift the machine by the DK Roll cover. The cover could come off and the
machine could fall and become damaged.
Do not allow the machine to get wet in any way.
Do not use the machine with foreign objects in it. If water or any foreign objects should
enter the machine, unplug the power cord from the electric outlet and remove the foreign
object. If necessary, contact the retail outlet where the machine was purchased or your
local authorized service center.
Do not hold the machine with only one hand. The machine may slip out of your hand.
Never disassemble the machine or allow it to get wet to avoid possible fire or electrical
shock. Doing so could cause an electrical shock or fire.
Do not use paint thinner, benzene, alcohol or any other organic solvents to clean the
machine. Doing so may cause damage to the surface finish. Use a soft, dry cloth to clean
the machine.
Do not put any heavy objects or objects containing water on top of the machine.
If water or any foreign object enters the machine, contact the retail outlet where the
machine was purchased or your local authorized service center. If you continue to use the
machine with water or a foreign object in the machine, the machine may be damaged or
personal injury could result.
The electrical outlet should be close to the machine and be easily accessible.
Do not touch the cutter. Personal injury could result.
Do not expose the machine to direct sunlight or near heaters or other hot appliances, in
any area exposed to extremely high or low temperatures, high humidity or dusty areas.
Doing so could cause the machine to malfunction.