Brother TD-2120N - Manual (Page 6)

5
En
g
lis
h
Attaching the Touch
Panel Display
a
Remove the tapes (1) and protective
materials (2) before use.
b
Press and hold the (Power) button to
turn the printer off, and then disconnect
the printer from the AC power outlet. If
the rechargeable Li-ion battery
(optional) is being used, remove the
rechargeable battery.
c
Press the cover release lever (1) on
either side and lift up to open the RD
Roll compartment top cover.
1 Cover release lever
2 Top cover
d
While holding the RD Roll compartment
top cover securely, use a screwdriver to
remove the four screws (1).
e
Close the RD Roll compartment top
cover, and then remove the top cover
(1).
2
1
2
1
1
2
Be careful not to allow the top cover to
fall when the four screws are removed.
1
1