Brother TD-2120N - Manual (Page 11)

10
Information About Replacing
the Touch Panel
a
The TDU panel cover is attached with
four tabs. While pressing the two tabs
(1) at the front, slide the cover up and
unhook the tabs. Then, press the two
tabs (2) at the back to unhook the tabs
in the same way.
b
Remove the TDU panel cover, and
place the touch panel (1) to be used,
then the clear protective sheet (2) on the
touch panel holder (3).
c
Install the TDU panel cover in its original
position.
Since foreign material, such as dust,
caught between the touch panel,
protective sheet and touch panel holder
may cause a malfunction. Make sure
that no foreign material is attached.
1
2
1
2
3
When the touch panel is replaced, the
setting for the touch panel display must
be changed. For details, see Selecting
the Touch Panel on page 18.