Brother QL-720NW - Manual (Page 29)

ESC/P Command Reference
- 23 -
5. Control Command Details
ESC k Select font
ASCII: ESC k n
Decimal: 27 107 n
Hexadecimal: 1B 6B n
Parameters
0≤n≤4, 9≤n≤11
Description
 Selects the font.
Bitmap Fonts Outline Fonts
n=0 Brougham (fixed pitch) n=9 Letter Gothic (fixed pitch)
n=1 Letter Gothic Bold (fixed pitch) n=10 Brussels (proportional pitch)
n=2 Brussels (proportional pitch) n=11 Helsinki (proportional pitch)
n=3 Helsinki (proportional pitch)
n=4 San Diego (proportional pitch)
 The default value is n=0 (Brougham (fixed pitch)).
 If the font is changed from a bitmap font to outline font, the character size is changed to the default setting
(42 dots).
 If the font is changed from an outline font to bitmap font, the character size is changed to default setting
(32 dots).
ESC t Select character code set
ASCII: ESC t n
Decimal: 27 116 n
Hexadecimal: 1B 74 n
Parameters
n=0, 1, 2
Description
 From the three built-in character code sets, selects the character code set used.
n=0: Standard character code set
n=1: Eastern European character code set
n=2: Western European character code set
n=3: (Reserved)
 The default setting is n=2.