Brother QL-720NW - Manual (Page 19)

ESC/P Command Reference
- 13 -
3. ESC/P Command Limitations
3.2 Characters
This system uses single-byte character codes and is installed with five bitmap fonts (Brougham, Letter Gothic
Bold, Brussels, Helsinki and San Diego) as well as three outline fonts (Letter Gothic Bold, Brussels and
Helsinki.
Fixed pitch or proportional pitch (PS pitch) can be specified for any of the fonts.
However, there are fonts that are better with a fixed pitch and fonts that are better with a proportional pitch (PS
pitch).
The fonts that are better with a fixed pitch are: Brougham and Letter Gothic Bold.
The fonts that are better with a proportional pitch are: Brussels, Helsinki and San Diego.
Each of the five bitmap fonts has three sizes: 24 dots, 32 dots and 48 dots.
3.2.1 Character sizes
Each font is available in full size, compressed size (half width), double width, double height and half width,
double height, and quadruple size.
Full size Double width Double height Quadruple size Half width Double height
and half width
The actual character size is slightly smaller than the nominal size (the parameter value received with the size
command). This varies depending on the font.
Nominal (dots) 24 32 48
Height (dots) 21 28 44
Width (dots) 11 16 26
The above example is for Brougham (full size, no character styles applied).
The line-drawing characters (┘└ ┤─ ├ │ ┼ ┬ ┐┌ , etc.) and shaded characters have the Brougham font
applied regardless of the specified font and pitch (proportional or fixed) settings.