Brother PJ-622 - Manual (Page 5)

Brother PJ-600 Series Command Reference 3
© 2011 Brother Industries, Ltd. All Rights Reserved.
3.
Print Data
3.1. Print data overview
The print data is constructed of the following: ① Initialization data, ② Printing commands and ③ Print
command. If the print job consists of multiple pages, ② through ③ are repeated.
1. Initialization data
The beginning of the job is specified only once.
Sequence Command Name Description/Example
1 Invalid command 700
bytes
Sends the “invalid” command to the PJ unit, then clears
raster data remaining in the unit.
00 H, 00 H, 00 H, … ,00 H
2 Switch command mode Switches the command mode of the PJ unit.
1B H , 69 H , 61 H , 00 H
3 Initialize Initializes the print buffer.
1B H , 40 H
4 Set 2-ply mode To specify the disable setting for 2-ply paper:
1B H , 7E H , 70 H , 00 H
5 Set density Specifies the print density. To set the density to 5:
1B H, 7E H, 64 H, 80 H, 00H
6 Set form feed mode Specifies the operation that is performed when the “Form
Feed” command is received.
To feed according to the paper size specified with the
“Set paper height” command (step 9):
1B H, 7E H, 66 H, 01 H
7 Set dash line print To turn off printing of the dashed line:
1B H, 7E H, 2D H, 00 H
8 Set paper width Specifies the paper width. For A4 on a 300 dpi model:
1B H, 7E H, 77 H, 2C H, 01 H
9 Set paper height Specifies the paper size. For A4 on a 300 dpi model:
1B H, 7E H, 68 H, E4 H, 0C H
*If an unlimited length or custom paper size is selected, use “Set paper length” command in step 9.