Brother PJ-622 - Manual (Page 39)

Brother PJ-600 Series Command Reference 37
© 2011 Brother Industries, Ltd. All Rights Reserved.
Name Auto Adjust Sensor
Syntax ESC + ~ + e + C + {n1}
1B H + 7E H + 65 H + 43 H + {n1}
Description Automatically adjusts the threshold for the sensor that detects the paper. The
machine that receives this command feeds the paper and detects the black mark.
After this command is sent, notification of the results is returned as 2 bytes.
Definition of {n1}
01 H(1): Perform automatic adjustment
Notification of results
・ First byte
00 H(0): Failed
01 H(1): Succeeded
・ Second byte
Specified paper sensor threshold value if succeeded
ex) 1B H 7E H 65 H 43 H 01 H (perform automatic adjustment)
・ Reception example of notification of results 1: 00 H
→Failed to perform automatic adjustment.
・ Reception example of notification of results 2: 01 H 96 H
→Succeeded in performing automatic adjustment, and set the value to 150.
Name Factory Reset
Syntax ESC + ~ + R
1B H + 7E H + 52 H
Description Returns the unit to its manufacturer default settings.
Overwrites the settings in both the non-volatile memory and RAM with the
manufacturer default settings.
If the current settings are the same as the manufacturer default settings, they are
not overwritten.
Then, the reset can be saved on the machine if the “initialize” command is sent.