Brother PJ-622 - Manual (Page 35)

Brother PJ-600 Series Command Reference 33
© 2011 Brother Industries, Ltd. All Rights Reserved.
Name Specify Default font
Syntax ESC + k + {n1}
1B H + 6B H + {n1}
Description Select the font to be used.
Definition of {n1}
00 H(0):Serif
01 H(1):Sans Serif
Name Specify reduced characters
Syntax ESC + 0x0F
1B H + 0F H
Description The width of proportional characters is halved (10 cpi→16.67 cpi and 12 cpi → 20
cpi).
After this command is specified, the page length in lines and bottom margin must
be specified again.
In addition, the final character size when this command is executed and the
“specify double-width characters” is set becomes the size of the double-width
characters after they are reduced.
Name Cancel reduced characters.
Syntax ESC + 0x12
1B H + 12 H
Description Cancels reduced characters
After this command is specified, the page length in lines and bottom margin must
be specified again.
Name Apply bold style
Syntax ESC + E
1B H + 45 H
Description Applies the bold style to alphanumeric characters.