Brother RJ-4030 - Manual (Page 7)

Raster Command Reference
- 3 -
1. Printing Using Raster Commands
1. Printing Using Raster Commands
The printing procedu re is described below. For detailed flow charts, refer to “ 6. Flow Charts ”. For details on
each command, refer to “ 4. Printing Command Details ”.
In addition, descriptions of the commands for the MCR (magnetic card reader) are provided. For details, refer
to “ 5. MCR Command Specifications ”.
(2) Send the status
(Confirm the printer status.)
(プリンタの状態を確認)
(1) Open the port
(5) Send the status
(Confirm that printing is completed.)
(6) Close the port
Port
(4) Print
At
y
our
s
ide
(3) Send the print data
Your printer
Computer, mobile
terminal, etc.