Brother RJ-4030 - Manual (Page 12)

Raster Command Reference
- 8 -
2. Print Data
Step 1: Change the port of the printer to “FILE:”.
Open the Printers and Faxes folder, and then right-click the printer (in this case, RJ-4030) to display
the Properties dialog box. In the Properties dialog box, click the [Ports] tab, select the “FILE:” check
box, and then click the [Apply] button.
[Ports] tab of the printer Properties dialog box
Step 2: Print the item (in this case, the test page), and then specify the file name.
For this sample, print the test page with the default print settings, which were specified immediately
after the printer driver was installed.
Default settings immediately after installation of the printer driver