Brother RJ-4030 User Manual
Page 25

Raster Command Reference
- 21 -
4. Printing Command Details
(3) Media width and length
The media width and length is described in millimeters. 0~255 (0 to FFh)
(a) Continuous length tape
* Media Width: The tape width is indicated in millimeters.
* Media Length: Fixed at 00h
Media
Media Width
Media Length
102 mm
102
00
(b) Die-cut labels
* Media Width: The width of the die-cut section is indicated.
* Media Length: The length of the die-cut section is indicated.
Media
Media Width
Media Length
102 mm x 26 mm
102
26
102 mm x 50 mm
102
50
102 mm x 76 mm
102
76
102 mm x 102 mm
102
102
102 mm x 152 mm
102
152
(4) Media type
Media Type
Value
Description
No media
00h
Used as print information when the
media type is not indicated.
Continuous length tape
4Ah
Used for both paper and film.
Die-cut labels
4Bh
Used for both paper and film.
(5) Status type
Status Type
Value
Description
Reply to status request
00h
Printing completed
01h
Error occurred
02h
Turned off
04h
Notification
05h
Phase change
06h
(Not used)
08h to 20h
(Reserved)
21h to FFh
If an error occurred during printing, the printer returns the error status.