Timeguard SELEKTA 170 top2 User Manual

Page 8

Menu PROG

Sub-menu NEW

Example Programming of nighttime interruption

Four phases of the night are always passed through when
programming. The clock switches on in the evenings at sun-
set (astronomical) (Step 1) and at a pre-determined time
(e.g. 11:00 p.m.) shuts off again (Step 2). In the morning it
again switches on at a fixed time (e.g. 4:00 a.m.) (Step 3)
and at sunset (astronomical) shuts off again (Step 4).

1. Select menu item PROGRAM.

2. Confirm with the OK key.

3. Use the + or – key to select the

sub-menu NEW.

4. Confirm with the OK key .

The display shows ASTROTIME.

5. Confirm with the OK key.

The display shows PROG TIME.

6. Press the + key.

The display shows ADD.

7. Confirm with the OK key.

The display shows SET.

Menu PROG

Switching program

Using the Menu key, you go from Automatic mode to the
main menu of the input mode. Select menu item PROG
(PROGRAM) and confirm with the OK key. Using the +
or

– key, you can switch between the sub-menus New,

Check, Modify, Clear and Finish. Using the OK key,
confirm the respective Menu. By confirming Finish, you
return back to Automatic mode.

The astronomical switching times are automatically stored
after start-up of the clock and after inputting the position
information and will be performed daily. In the menu
PROG additional fixed nighttime interruptions can be pro-
grammed in or astronomical switchings can be deactivated.