Timeguard SELEKTA 170 top2 - Manual (Page 3)

3. Equipment description
Overview of programmed switch times
with segments every 30 minutes
Pictogram line with PROG,
MAN,
Astronomical and switch time symbols
Sunset ON
Start nighttime interruption OFF
End of nighttime interruption ON
Sunrise OFF
Channel status
Ein = ON, AUS = OFF
Selection Menu (when inputting information in
the device always press the Menu key first)
PROG,
, MAN, or
Aborting input
Service voltage OK: two dots flash
Power failure: three dots flash
Key + or – = answer NO,
or continue (and setting of values,
e.g. change clock time)
Menu
+ – ok
1 2 3 N
PROG MAN COPY
1 2 3 4 5 6 7 1
min
klx s
Text lines (always represents a question in
the operating menu, which must be answe-
red with YES (Key OK) or NO (Keys + or -)
Time display
a.m./p.m. change segment (not visible
with 24-hour design)
s = seconds
min = minutes
Days of the week from 1 to 7 with an
arrow for changeover of day (1 = Monday,
2 = Tuesday ..)
Key OK = answer YES
Confirmation of selection or
programming
Direct manual switching (only in
Automatic mode)
• press both keys at the same time
=> manual switching (switching pre-selection)
• press both keys at the same time for about
2 seconds
=> permanent switching
26