Timeguard SELEKTA 170 top2 - Manual (Page 7)

30
Initial start-up
Initial start-up by coordinates
1. Instead of LOCATION, use the + or – key to
select COORDINAT. Confirm with the OK key.
2. Select your geographic location from the
accompanying time zone by longitude,
latitude and time zone.
3. Use the + or – key to set your location coordinates
of southern/northern latitude. Inputting the
latitude ranges from 0° north to 90° south.
4. Confirm with the OK key.
5. Use the + or – key to set your longitude
west or east. Inputting the latitude ranges
from 180° east to 180° west.
6. Use the + or – key to set your longitude or
your time zone (e.g. Germany +01 hours).
7. Store by pressing the OK key.
The timer is now ready to use and is in
Automatic mode.
Initial start-up
1. Using the + or – key, select your
language (e.g. English).
2. Store by using the OK key.
You can now start the clock by inputting
default locations or coordinates.
Initial start-up by location
1. Confirm LOCATION with the OK key.
Display UK (on moving screen).
2. Select your country with the + or – key.
Confirm with the OK key.
3. Use the + or – key to select the city
in your area (e.g. LONDON).
Confirm with the OK key.
Since the date and the time are already
pre-programmed ex factory, the timer is
now ready to use and is in
Automatic mode.