Prochem Blazer XL - Manual (Page 11)

TECHNICAL SPECIFICATIONS
86037390 01/25/08
3-1
ITEM DIMENSION/CAPACITY
Engine speed
3200 rpm
1400 (idle speed)
Water pump rpm 1625 rpm
Vacuum pump rpm 3200 rpm
Water flow rate 3.5 GPM (maximum)
Water pump pressure 1000 PSI (maximum)
Vacuum relief valve 13” Hg
Waste tank capacity 60 gallons
Console weight 500 lbs. (590 lbs. If mounted on water tank)
Console weight (with waste tank & accessories) 710 lbs (If waste tank is empty)
(1225 lbs. If waste tank is full)
(1740 lbs. If auxiliary water tank & waste tank are full)
TORQUE VALUES
Engine rear Vac pump pulley 264 inch lbs 22 foot/lbs
Engine front stub shaft 264 inch lbs 22 foot/lbs
Engine front water pump pulley on stub 168 inch lbs 14 foot/lbs
JET SIZING:
Prochem recommends floor tool tip sizing not exceed a total of “.030”. Using larger jet sizes on your tool may
reduce cleaning temperatures.
Example:
Tri-jet wand uses three 95010 jets (95° spray angle w/ 010 orifice).
01 x 3 = 030
Upholstery tool jet size:
80015
Stair tool jet size: 9502