PNI SeaTRAX - Manual (Page 34)

PNI Sensor Corporation DOC#1018154 r02
SeaTRAX User Manual Page 29
6.4.3 Current Configuration
These indicators mimic the pertinent selections made on the Configuration tab.
6.4.4 Options
This window indicates how many samples are to be taken and provides real time heading,
pitch, and roll information if “HPR During Calibration” is set to , both as defined
on the Configuration tab.
Audible Feedback
If selected, SeaTRAX Studio will give an audible signal whenever a calibration
sample point is taken.
6.4.5 Clear
Clear Mag Cal to Factory
This button clears the user’s calibration of the magnetometers. Once selected, the
module reverts to its factory magnetometer calibration. To save this action in
nonvolatile memory, click the button. It is not necessary to clear the current
calibration in order to perform a new calibration.
Clear Accel Cal to Factory
This button clears the user’s calibration of the accelerometer. Once selected, the
module reverts back to its factory accelerometer calibration. To save this action in
non-volatile memory, click the button. It is not necessary to clear the current
calibration in order to perform a new calibration.