PNI TCM 5 - Manual (Page 6)

PNI Sensor Corporation Doc #1007537 r12
TCM3 & TCM5 User Manual- Sept 2011 Page 6
2.1.6 I/O Specifications
Parameter TCM3 TCM5 Units
Time to Initial Good Data from
Power On
1
<210 <210 msec
Time to Initial Good Data from
Sleep Mode
1
<80 <80 msec
Maximum Sample Rate
2
~30 ~30 samples/sec
RS-232 Communication Rate 300 to 115200 300 to 115200 baud
Output Formats Binary High Performance Protocol
[1] FIR taps set to “0”.
[2] The maximum sample rate is dependent on the strength of the magnetic field, and typically will be from 25 to 32
samples/sec.
2.1.7 Power Specifications
Parameter TCM3 TCM5 Units
Supply Voltage 3.8 to 5 V (unregulated) 3.8 to 5 V (unregulated) VDC
Current Draw at
maximum sample rate
20 typical 20 typical mA
Sleep Mode 0.6 typical 0.6 typical mA
2.1.8 Environmental Specifications
Parameter TCM3 TCM5 Units
Operating Temperature -40º to 85º -40º to 85º C
Storage Temperature -40º to 85º -40º to 85º C