PNI TCM 5 - Manual (Page 38)

PNI Sensor Corporation Doc #1007537 r12
TCM3 & TCM5 User Manual- Sept 2011 Page 38
1 10.0
Declination ID Declination
Angle
(Float32)
kSave (frame ID 9)
This frame commands the module to save internal configurations and user calibration to non-volatile
memory. Internal configurations and user calibration is restored on power up. The frame has no payload.
This is the ONLY command that causes the module to save information into non-volatile memory.
kStartCal (frame ID 10)
This frame commands the module to start user calibration with the current sensor acquisition parameters,
internal configurations and FIR filter settings.
kStopCal (frame ID 11)
This frame commands the module to stop calibration points sampling and calculate the calibration
score and coefficients.