PNI TCM 5 - Manual (Page 20)

PNI Sensor Corporation Doc #1007537 r12
TCM3 & TCM5 User Manual- Sept 2011 Page 20
Current Configuration:
Stability Checking: Indicates if the Stability Checking option has been selected.
Automatic Sampling: Indicates if the Automatic Sampling option has been selected.
Number of samples is: Indicates the number of samples to be taken for the current calibration.
Options :
Audible Feedback: If selected the TCM Studio will give an audible signal once a calibration point
has been taken.
Clear:
This button will clear the user calibration in the unit. Once selected, the unit will revert back to its
factory calibration.
4.1.5 Test Tab
Current Reading:
Once the button is selected the unit will begin outputting Heading, Pitch and Roll information.
Selecting the button or changing tabs will halt the output of the unit.
Contrast:
Reverses the background color of the current reading window.
Acquisition Settings:
This window indicates the pertinent setting information.
3D Model:
The helicopter will follow the movement of the attached module and give a clear representation of the
module’s orientation.