NORD Drivesystems BU0240 - Manual (Page 6)

NORDAC SK 200E Manual
6 BU 0240 GB
1 General information
These brief instructions for the SK 200E are based on the user manual for the frequency inverter - BU0200.
In addition to information concerning safety and use, this document also contains selected information on
commissioning, as well as use of the frequency inverter in explosion hazard areas (ATEX Zone 22).
This manual is based on the device software V1.2 R0 (see P707) of the SK 200E. If the frequency inverter
uses a different software version, this may cause differences.
A detailed description of the SK 200E and its options can be found in the user manual (BU0200). This and
other documents can be downloaded free of charge from
www.nord.com .
1.1 Delivery
Check the equipment immediately after delivery/unpacking for transport damage such as deformation or
loose parts.
If there is any damage, contact the carrier immediately and carry out a thorough assessment.
Important! This also applies even if the packaging is undamaged.