NORD Drivesystems B1904 - Manual (Page 8)

Operating and Installation Instructions FDB (Getriebebau NORD)
Version 08.2011
Page 8 of 23
2.4.3 Directives and Standards
The spring-applied brake was produced in accordance with the following EC directives
and standards
:
- EC Directive Machinery (2006/42 EC)
- EN ISO 12100-1 and 12100-2: Safety of Machinery (Basic Concepts)
- EC Directive Electromagnetic Compatibility (2004/108 EG). Compliance with this directive has
to be safeguarded with the appropriate switchgear of the user.
The spring-applied brake is not an independently operable machine but intended to be
installed in other machinery. Its commissioning is prohibited until the establishment is
reached that the machines comply with the provisions of the EC Directive
.
2.5 Delivery Scope and State
Check the delivery scope and state immediately upon receipt of the brake.
M/s. Precima will not assume any warranty for subsequently claimed defects
(refer to 2.4.2).
Immediately report damage in transit to the forwarders and the incompleteness of the delivery
and visible defects to the manufacturer plant.
ÎAttention!
Should any uncertainties or discrepancies occur during the examination or should the
delivery be incomplete or defective, the brake must not be installed or commissioned
without previously contacting PRECIMA.