NORD Drivesystems B1904 - Manual (Page 7)

Operating and Installation Instructions FDB (Getriebebau NORD)
Version 08.2011
Page 7 of 23
ÎAttention!
Friction surfaces and the friction lining should not under any circumstances be in
contact with oil or grease since already small quantities reduce the braking torque
considerably!
2.2.4 General Operating Conditions
Operating time: 100%
Ambient temperature: -10…+45°C
Should any of the above parameters be exceeded . M/s. PRECIMA should be contacted
for advice.
2.3 Proper Use
At the time of delivery, the spring-applied brake represents the state of the art technology, and
is generally considered to be reliable in operation. Only use it properly in order to avoid any risk
to persons and material assets.
The spring-applied brake is properly used, if qualified personnel (according to 2.1.2) by applying
the valid operating and assembly instructions (as per 1.1, according to 1.2) produces and
maintains
a permissible state of application (according to 2.2.3) in an admissible environment
of application (according to 2.21).
The improper (inappropriate) use includes hazards which could not be completely taken
into account when designing and construction the brake and which are unforeseeable in
this sense.
2.4 Legal Aspects
2.4.1 Liability
On the basis of the information, data and directions given and of the illustrations and
descriptions included in these operating and assembly instructions, no claims for brakes outside
the area of application of these instructions (compare 1.1) may be submitted.
In general, an inappropriate use of the brake (compare 2.3) will exclude the liability of M/s.
PRECIMA.
2.4.2 Warranty
For the warranty terms refer to the General Terms of Sales and Delivery of M/s. PRECIMA
(www.precima.de / AGB). In all cases, warranty claims are to be submitted to PRECIMA
immediately after establishing a deficiency or a defect. The exclusion of liability according to
2.4.1 simultaneously means that no warranty claim exists.