Information on operating and assembly instructions – NORD Drivesystems B1904 User Manual
Page 4
Operating and Installation Instructions FDB (Getriebebau NORD)
Version 08.2011
Page
4
of 23
1. Information on Operating and Assembly Instructions
1.1
Validity
These operating and assembly instruction (in accordance with their title) are generally valid only
for the Getriebebau NORD design of the electromagnetically released spring-applied
brakes FDB 08 to FDB 40
of M/s. PRECIMA Magnettechnik GmbH. Moreover, they are a
necessary element of every brake delivery and generally only valid for such simultaneously
delivered brakes. The operating and assembly instruction will even continue to be valid for such
brakes, if a later version of the instructions exists, unless M/s. PRECIMA expressly declares to
the customer that the later version replaces the older one.
In individual cases, the above mentioned principles may be deviated from (e.g. in case of
special designs or repeated deliveries). In any case, an indicative or supplementing information
of M/s. PRECIMA will be required.
1.2 Purpose and Use
These operating and assembly instructions are to contribute to a safe and proper
assembly and operation of the spring-applied brake
.
In order to meet this requirement and purpose, all the persons dealing with the assembly and
the operation of the brake (qualified according to 2.1.2) have to completely and thoroughly
read
these instructions before carrying out their respective activities (assembly, commissioning,
operation, maintenance, etc.). Furthermore, said persons of course have to observe and
implement the given instructions
when carrying out their respective activities. The
instructions themselves must be accessible any time (even after completion of the respective
activity) and within short time in a clean, complete and well legible condition.
Despite careful and thorough elaboration of the instructions, mistakes, defects and
incompleteness in the operating and assembly instructions cannot be excluded. For this reason,
please consult M/s. PRECIMA if in doubt. Other technical questions, notes and suggestions for
improvement can also be directed to the following address:
Röcker Straße 16
D – 31675 Bückeburg
Telefon Nr.: +49 (0) 57 22 / 89 33 2 -0
Telefax Nr.: +49 (0) 57 22 / 89 33 2 -2
E-mail: [email protected]