Milestone XProtect Smart Client 2013 - Manual (Page 86)

Milestone XProtect ® Smart Client
2014
User's Manual
www.milestonesys.com 86 Defining your views
2. In the System Overview pane, drag the Smart Wall link to the relevant position in the view.
3. The position in the view now contains a graphical representation of the Smart Wall.
If your organization has more than one Smart Wall, select the relevant Smart Wall from the
Smart Wall menu that appears at the top of the graphical representation.
If the relevant Smart Wall has several presets (predefined settings determining which cameras
are displayed as well as how content is structured on each monitor in the Smart Wall), select
the relevant preset in the Preset menu.
The Smart Wall and Preset menus also appear on the Live and Playback tabs, so users can
afterwards select different Smart Walls and/or presets if required.
If the Preset menu shows Select Preset... after you have made a selection, your setting is applied.
However, note that other users may have changed the preset manually or that predefined rules on the
surveillance system may have changed it automatically.
Tip: The bottom of the 1+1+2 view provides a wide position ideal for displaying Smart Wall content.
The 1×3 view is capable of graphically representing three different Smart Walls at the same time.
Drag cameras onto a Smart Wall

To display relevant cameras on your Smart Wall, drag (click and hold down the mouse button)
the camera from the Live tab, in the Cameras pane onto a monitor in the graphical
representation of a Smart Wall.