Introduction, User operation – FUTEK IHH200 Digital Display User Manual
Page 5
10 Thomas, Irvine, CA 92618
USA T (949)-465-0900 F (949)-465-0905
IHH200 Manual 2.5 - Page 5
Introduction
The IHH200 Portable Strain Display Load Cell/Force transducer readout is a microprocessor based portable instrument
designed to interface with any full bridge sensor with an output sensitivity of up to 50mV/V. Bridge resistances from 85:
upwards can be used with the IHH200.
Configuration and calibration of the IHH200 is achieved using the front panel push buttons to navigate through a very
simple menu structure.
User functions available on the IHH200 include:-
Range Selection
Display Hold/Freeze
Gross/Tared indication selection
Peak Hold selection
Valley Hold selection
Shunt Cal check
The IHH200 is powered by two internal non-rechargeable AA alkaline batteries. There is an option to have rechargeable
alkaline batteries.
User Operation
Push buttons used for normal
operation and for configuration
Full 7 Digit LCD Display
Unit Labels
Operation Annunciators