Rs232 set oper auto off – FUTEK IHH200 Digital Display User Manual
Page 12

10 Thomas, Irvine, CA 92618
USA T (949)-465-0900 F (949)-465-0905
IHH200 Manual 2.5 - Page 12
Parameter
Set-Up Information
Press
To skip to next menu item.
Press
To select operation mode.
This allows the enabling or disabling of the power save mode, which updates at 1 update
per second and pulses the sensor excitation. This results in a lower accuracy (1 part in
20,000).
To enable press
.
To disable press
.
Press
To skip to next menu item.
Press
To set auto power off.
This enables the setting of an auto power off value. The value entered is in minutes. If no
front panel buttons are pressed for the time set here, then the indicator will automatically
power off, to conserve battery life.
Values between
05
and
99
can be entered (
00
leaves the IHH permanently powered),
using the
and
arrows to select a digit and the
and
arrows to
increment or decrement the digits. Press
to accept the value and move onto the
next parameter.
Press
To skip this parameter and exit menu.
Press
To enable the RS232 output.
This feature enables you to enable or disable the RS232 output. Further details of the
format are provided further into this manual. The RS232 output is an option that has to be
RS232 ordered with the IHH. To conserve battery life, it is suggested that the RS232
output is disabled when it is not required.
To enable press
.
To disable press
.
rS232
SEt OPEr
AUtO OFF