Badger Meter Fluid Management System - Manual (Page 6)

Electronic Preset Meter Model EPM-3, RF 2.4 GHz
ELECTRONIC PRESET METER DESCRIPTION
Disclaimer
The user/purchaser is expected to read and understand the information provided in this manual, follow any listed Safety
Precautions and Instructions and keep this manual with the equipment for future reference.
The information in this manual has been carefully checked and is believed to be entirely reliable and consistent with the
product described. However, no responsibility is assumed for inaccuracies, nor does Badger Meter Inc. assume any liability
arising out of the application and use of the equipment described.
Product Identification Information
Record the product identification numbers from the nameplate here.
Model Number _______
Serial Number _______
Tag Number
_______(if applicable)
Certification
• Contains FCC ID: S4GEM35XB
• Contains IC: 8735A-EM35XB
• FCC CERTIFIED, PART 15, SUB-PART C
• CE0681 EC-R&TTE Certified
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more
should be maintained between the antenna of this device and persons during operation. To ensure compliance,
operations at closer distances than this are not recommended.
Page 6 November 2012